The basic requirements for the material performance of stainless steel conveyor chains are generally high strength and good wear resistance, and the transportation chain is no exception. However, compared with the transmission chain, the conveying chain has a slower speed and a larger load capacity, and the total length of the chain used and the number of chain links are large, so the quality of the chain is large. Especially for large roller conveyor chains, because the quality of large rollers occupies a larger proportion in the chain, the problem of large quality of stainless steel conveyor chains is even more prominent. A chain with an excessive mass will greatly increase the tension received by the chain, thus increasing the consumption of ineffective power.
When the mesh belt conveyor needs to be shut down during transportation, the loading should be stopped first, and the machine can be shut down after the material on the conveyor belt is discharged. When several conveyors are shut down in tandem operation, they should be shut down in order from the feeding end. Before starting, the tightness of the conveyor belt should be adjusted, the buckle should be strong, the transmission parts such as bearings, gears, and chains should be sophisticated, the rollers and protective installations should be complete, the electrical shielding should be connected to zero or grounding, and the width of the conveyor belt and the roller should be Consistent. When starting, it should be operated with no load first, and then can be evenly loaded after normal operation. If we pay attention to these issues in peacetime, it will also bring great convenience to our work.
