Stainless steel mesh belt has excellent corrosion resistance, abrasion resistance, high temperature resistance and other properties, and has freehand cold shrinkage resistance, oxidation resistance and fracture resistance under negative temperature and high temperature. However, the mesh belt will show signs of corrosion due to many factors during the application process. Therefore, it is necessary to remove the rust in time to avoid affecting the work of the conveyor belt. Daily maintenance should start from the drip. Daily maintenance is the best for the conveyor belt. Do not wait until the rust is stained before trying to restore it. It will be more troublesome to clean up, so if the conveyor belt is not corroded, it is necessary to start with bit by bit maintenance. Let us learn how to eliminate the rust of the conveyor belt.
Most of the stainless steel mesh belts are removed by the traditional soaking method, but this method requires a large washing tank, which is very inconvenient, and after the pickling solution is used for a period of time, many metal salts will be produced, which will affect the washing effect. Therefore, in order to maintain the acid The suitable metal ion concentration and acidity in the washing liquid must be strictly monitored. Several washing tanks are often connected in series, so that the body to be washed can pass through each washing tank in turn, putting higher requirements on the required site.
In order to meet the needs of the market, the simplest method of rust removal today is to use solid stainless steel rust remover, which is mainly based on the corrosive effect of sulfuric acid, supplemented by the acceleration effect of fluoride, and adding kaolin as the main auxiliary agent to make stainless steel oxidation Solid leather cleaner is very convenient to use. When the stainless steel mesh belt is rusty, it is best to use solid stainless steel rust remover.
